Why does Dji pocket 2 stop recording after 10 seconds

 If your DJI Pocket 2 is stopping recording after only 10 seconds, there could be several reasons for this issue. Here are some troubleshooting steps to help you resolve it:

Storage Space: Check if your microSD card has sufficient free space. If the card is full or nearly full, the camera may stop recording prematurely.

Recording Settings: Verify that you haven't accidentally set a specific recording duration limit in your camera settings. Some cameras allow you to set a maximum recording duration to split long videos into smaller clips.

Battery Life: Insufficient battery power can cause recordings to stop abruptly. Ensure that your DJI Pocket 2 is adequately charged before starting a recording.

Overheating: If the camera gets too hot, it may automatically stop recording to prevent damage. Make sure the camera is not exposed to extreme heat or direct sunlight for prolonged periods.

Firmware Update: Check if there are any firmware updates available for your DJI Pocket 2. Updating the firmware can sometimes resolve software-related issues.

MicroSD Card Issues: Try using a different microSD card to see if the issue persists. It's possible that the card you are using has a problem.

Factory Reset: If none of the above steps work, you might consider performing a factory reset on your DJI Pocket 2. Be aware that this will erase your settings, so make sure to back up any important configurations or footage before doing so.

Contact Support: If the problem continues after trying these steps, it's a good idea to reach out to DJI customer support or visit their official forums for assistance. There may be a hardware or software issue that requires professional attention.

Keep in mind that these steps are general troubleshooting suggestions, and the specific solution may vary depending on your camera's configuration and the exact cause of the issue.